Wednesday, July 4, 2012

Nokia Mobile Tricks



NETWORK MONITOR
There is a hidden menu inside your Nokia phone. If you want to activate it, you'll have to re-program some chips inside of your phone.
  1. Check your software version. You can only continue if you have v4.33, v4.73 or v5.24.
  2. Take apart the phone.
  3. De-solder the EEPROM (ATMEL AT 24C64).
  4. Read out the data with an EEPROM programmer and save it to a file (Backup).
  5. If you have v.33 or v4.73, change the address "03B8" from "00" to "FF".
  6. If you have v5.24 then change the address "0378" from "00" to "FF".
  7. Write the new data to the EEPROM and solder it back to the phone,
  8. Power on your phone and you should have "Netmonitor" enabled.
The Network Monitor gives you the following information.

  • Carrier number
  • MS RX Level in DBM
  • Received signal quality
  • MS TX power level
  • C1 (Path loss criterion, used for cell selection and reselection). The range is -99 to 99.
  • RTL (Radio link timeout).
  • Timeslot
  • Indication of the transmitter status
  • Information on the Network parameters.
  • TMSI (Temporary Mobile Subscriber Identity).
  • Cell identification (Cell ID, Number of cells being used).
  • MCC (Mobile country code)
  • MCN (Mobile network code)
  • LAC (Location area code)
  • Ciphering (On/Off)
  • Hopping (On/Off)
  • DTX (On/Off)
  • Discard cell barred information

CHECK SIM-LOCK
Note - If you bought your Nokia on UK Vodafone or UK Cellnet you do not need to check this because they both transmit on GSM900, and they don't lock the phones. However if you bought your phone on UK Orange or UK One2one your phone may be blocked. The reason is that they both transmitt on GSM1800. To make a call on GSM1800 you need what is known as a "Dual band" phone. A dual band phone is able to transmit on both GSM900 and GSM1800, so they lock the phones so you can't use it with any other network simcard. If you find that your phone is locked you can try different software to unlock it. (we havn't found one that works yet), or you can ask your service provider who will gladly exchange the 10 digit code for about £35.
This is how to check the status of the 4 different locks. Aslo don't try entering the wrong number, because after 3 times it will block the phone for good.

There are 4 different locks on your Nokia phone.
  • COUNTRY-LOCK
  • NETWORK-LOCK
  • PROVIDER-LOCK
  • SIMCARD-LOCK
The code to read out the sim-lock status of your phone is

#PW+(MASTERCODE)+(Y)#
  • # = DOUBLE-CROSS
  • W = PRESS "*" THREE TIMES
  • P = PRESS "*" FOUR TIMES
  • + = PRESS "*" TWO TIMES
  • MASTERCODE = 1234567890
  • Y = NUMBER 1 TO 4
The master code is a secret code. The code has 10 digits, To read out the sim-lock status you can enter every combination you want!
"Y" Shows the status of the network-lock. Here you can enter a number from "1" to "4". The "4" is for the sim-card lock.

SIM-LOCK CHECKS
  • #PW+1234567890+1# = GIVES PROVIDER-LOCK STATUS
  • #PW+1234567890+2# = GIVES NETWORK-LOCK STATUS
  • #PW+1234567890+3# = GIVES COUNTRY-LOCK STATUS
  • #PW+1234567890+4# = GIVES SIM-CARD-LOCK STATUS.

Nokia Mobile Useful Tricks / Nokia Secret Codes



Nokia Secret Codes



Warning!
We are not responsible to accident with your mobile phone.
You trying these Nokia Secret Codes only at your own risk!
We are not admit any explanation.
Thanks.
Today we will help you to play with your Nokia mobile phones using secret mobile codes. You can display the hidden information of Nokia handsets and troubleshoot the routine problems with the help of these codes. Below codes work on most Nokia cell phones.

*#06# for checking the IMEI (International Mobile Equipment Identity).
*#7780# reset to factory settings.
*#67705646# This will clear the LCD display(operator logo).
*#0000# To view software version.
*#2820# Bluetooth device address.
#pw+1234567890+1# Shows if sim have restrictions.
*#92702689# – takes you to a secret menu where you may find some of the information below:
1. Displays Serial Number.
2. Displays the Month and Year of Manufacture
3. Displays (if there) the date where the phone was purchased (MMYY)
4. Displays the date of the last repair – if found (0000)
5. Shows life timer of phone (time passes since last start)
*#4720# – Half Rate Codec activation.
*#4720* – Half Rate Codec deactivation. The phone will automatically restart
If you forgot wallet code for Nokia S60 phone, use this code reset: *#7370925538#
Note, your data in the wallet will be erased. Phone will ask you the lock code. Default lock code is: 12345
Press *#3925538# to delete the contents and code of wallet.
Unlock service provider: Insert sim, turn phone on and press vol up(arrow keys) for 3 seconds, should say pin code. Press C,then press * message should flash, press * again and 04*pin*pin*pin# \
*#7328748263373738# resets security code.
Default security code is 12345
Change closed caller group (settings >security settings>user groups) to 00000 and ure phone will sound the message tone when you are near a radar speed trap. Setting it to 500 will cause your phone 2 set off security alarms at shop exits, gr8 for practical jokes! (works with some of the Nokia phones.) Press and hold “0? on the main screen to open wap browser.
#bta0# Display the Bluetooth MAC address (models with build-in Bluetooth radio, activate first to show address)
*#mac0wlan# Display the WLAN MAC address (models with build-in Wi-fi radio)
*#opr0logo# Clear the operator logo (3310 and 3330 only)
*#pca0# Activate the GPRS PCCCH support (early GPRS models)
*#pcd0# Deactivate the GPRS PCCCH support (early GPRS models)
*#res0wallet# Reset the mobile wallet (models with mobile wallet)
*#res0# Soft-format the memory (Symbian models only)
*#rst0# Reset to factory defaults, confirmation required (DCT4 or newer)
*#sim0clock# Display the SIM clock status (DCT3 only)
*#ssn0# Display the manufacturing serial number (mid-range and premium, non-Symbian models, and those devired from them)
*#war0anty# Display the manufacturing and repair info (no exit on DCT3) or total talk time on Symbian models
*efr0# Enable EFR encoding (pre-2003 models)
#efr0# Disable EFR encoding (pre-2003 models)
*hra0# Enable HR encoding (pre-2003 models)
#hra0# Disable HR encoding (pre-2003 models)
*#7370# Restore the phone to factory default settings. You will loose all your settings, data, etc. This is used to reset the phone to the same state when it was brand new.
# *#2820# Show Bluetooth MAC address.
# *#62209526# Show Wireless LAN MAC address.
*3370# : Enhanced Full Rate Codec (EFR) activation. It will automatically restart.
#3370# : Enhanced Full Rate Codec (EFR) deactivation. It will automatically restart.
*4370# : Half Rate Codec activation. It will automatically restart
#4370# : Half Rate Codec deactivation. It will automatically restart
*#147# (vodafone) this lets you know who called you last *#1471# Last call (Only vodofone)
*#21# Allows you to check the number that “All Calls” are diverted To
*#2640# Displays security code in use
*#30# Lets you see the private number
*#43# Allows you to check the “Call Waiting” status of your phone.
*#61# Allows you to check the number that “On No Reply” calls are diverted to
*#62# Allows you to check the number that “Divert If Unrea chable(no service)” calls are diverted to
*#67# Allows you to check the number that “On Busy Calls” are diverted to
*#67705646# Removes operator logo on 3310 & 3330
*#73# Reset phone timers and game scores
*#746025625# Displays the SIM Clock status, if your phone supports this power saving feature “SIM Clock Stop Allowed”, it means you will get he best standby time possible
*#7760# Manufactures code
*#7780# Restore factory settings
*#8110# Software version for the nokia 8110