Free more RAM on your phone

Free more RAM on your phone

>>> Method 1: Flight mode:

Put your phone in "Flight mode" with Psiloc System Tools. Install System Tools, open it and select "Flight mode". This way you can restart the phone without your SIM card so there will be no running phone tasks in the background. Now you can have up to 3,5 MB of free RAM!

Note: ironically enough, Flight mode doesn't work when Smart Launcher is installed, at least in my case.
But i've also heard several reports of people who have both apps running without any problems.

>>> Method 2: Smart Launcher trick:

Install Smart Launcher and open it. Go to Options, Settings and put Launcher ON.
Now plug in your charger and switch off your phone. Wait until the battery meter appears and short press the Menu button (don't hold).
The menu should appear and now you can have 3,5 to 4,5 MB free RAM! (Hold Menu button to check RAM).

The trick is that with the charger plugged in, the phone must get a minimum software support for charging, even when
the phone is switched off. And somehow Smart Launcher has still got it's shortcut running and that's the Menu button. So when
you press the Menu button, you go directly to the Menu without any other phone tasks running in the background so
you trick the phone and you have more free RAM!
Note: when you unplug the charger, the phone will switch off.

>>> Method 3: Menu :

it frees a little about 100~200 KB but I guess it's useful sometime

Close your menu not by selecting the right selection key "exit", or pressing the menu key another time, they only hide the menu app but do not close it, to close it select the left selection key "option" and scroll down and select "exit"

So when you open an app needs more ram reopen menu and close it, it's useful when play low bit rate video in real player paradise.

Increase Font Size On Nokia E50

Increase Font Size On Nokia E50

You’ll need a memory card and a file manager (e.g. Y-Browser or ActiveFile).

1. Open your file manager and navigate to Z:\resource\Fonts

2. Check the names of the files (these are the fonts that are actually used); they have extension .ttf and most likely they are nosnr60.ttf, nssb60.ttf, nstsb60.ttf and S60ZDIGI.ttf; write them down, you’ll need them later

3. On your memory card create a folder called resource and inside it a folder called Fonts

4. Copy the new fonts to the Fonts folder on your memory card (there are numerous fonts available on the internet for free; try a few of them, experiment and see which fits the best)

5. Rename them in the following order: – nosnr60.ttf regular (normal) font – nssb60.ttf bold font – nstsb60.ttf font for titles

Note: if your font files have different names rename them accordingly. Font names on your memory card must match those on phone memory in Z:\resource\Fonts.

6. Reboot the phone

If you want to switch back to the default font simply erase the whole resource folder from your memory card. If you take your memory card out of the phone the default font will be used.


A Software can also increases font sizes use it for any s60...

Software: Font Magnifier
avialable at: http://shop.psiloc.com

know if your mobile(applicable to all Nokia, Sony, Motorola) is original or not ?????

Dear All

Very very Informative mail for you please don’t forgot to share this page .

Would you like to know if your mobile(applicable to all Nokia, Sony, Motorola)  is original or not ?????

Press the following on your mobile*#06# and the-international mobile equipment identity number appears. Then check the 7th and8th numbers:

	1	2	3	4	5	6	7 th	8 th	9	10	11	12	13	14	15
Phone serial no.	x	x	x	x	x	x	?	?	x	x	x	x	x	x	x

IF the Seventh & Eighth digits are 02 or 20 this means your cell phone was assembled in Emirates which is very Bad quality

IF the Seventh & Eighth digits are 08 or 80 this means your cell phone was manufactured in Germany which is fair quality

IF the Seventh & Eighth digits are 01 or 10 this means your cell phone was manufactured in Finland which is very Good

IF the Seventh & Eighth digits are 00 this means your cell phone was manufactured in original factory which is the best Mobile Quality
 
IF the Seventh & Eighth digits are 13 this means your cell phone was assembled in Azerbaijan which is very Bad quality and also dangerous for your health

source:http://whatyouwant.in/post/643/how-to-check-your-mobile-cellphone-is-original-or-not-applicable-to-all-nokia-sony-motorola.html

Nokia Mobile Tricks

To check the IMEI (International Mobile Equipment Identity) Type-

*#06#

Information you get from the IMEI-

XXXXXX  XX  XXXXXX  X

    TAC      FAC     SNR      SP

• TAC = Type approval code
• FAC = Final assembly code
• SNR = Serial number
• SP    = Spare

To check the phones Software revision type-

*#0000#

Information you get from the Software revision-

V 05.31

18-02-99

NSE-3

• 1ST Line  = Software revision
• 2ND Line = The date of the software release
• 3RD Line = Phone type

To enter the service menu type-

*#92702689# (*#WAR0ANTY#)

• Serial number (IMEI)
• Production date (MM/YY)
• Purchase date (MM/YY) You can only enter the date once.
• Date of last repair (0000=No repair)
• Transfer user data to another Nokia phone via Infra-Red

Clock Stopping

To check weather your SIM Card supports clock stopping type-

*#746025625# (*#SIM0CLOCK#)

Nokia Mobile Tricks

Revealing the Headphone and Car-Kit menus

Please note that if you do these next tricks, the new menus can't be erased without retoring the factory default settings. To do these tricks you need to short-circuit the pins on the bottom of the phone next to where you plug in you charger.

1. To activate the "Headset" menu, you need to short-circuit pins "3" and "4". After a short time the word "Headset" will be shown in the display. Menu 3-6 is now enabled.

2. To activate the "Car" menu, you need to short-circuit pins "4" and "5". After a short time the word "Car" will be shown in the display. Menu 3-7 is now enabled.

THE REBOOT TRICK

This should work on all software versions of the 6110.

1. Go to the Calendar (Menu-8)

2. Make a note or reminder.

3. Enter some text into the edit box.

4. Hold "Clear" until the whole text is cleared, then press "Back".

5. Press "0". The main screen will now be showing but a space appears on the screen. (you can't see it)

6. Enter 4 digits (e.g. 1234).

7. Use the down arrow to move the cursor to the left side of the numbers and the space (Down arrow twice).

8. Now enter 6 digits and press the call button.

Wait for a few seconds, the screen should start to flash and reboots. It should alsowork on other menus like the "Profiles" menu.

EFR CALL QUALITY

To activate EFR (Enhanced Full Rate) Enter the code-

*3370#

This improves call quality but decreases batterylife by about 5%

To deactivate it, Enter the code-

#3370#

THE JAMES BOND TRICK

If you short-circuit theleft middle and right pins on the bottom of the phone with all connections touching each other, the Nokia software hangs! The profile "Headset" will be activated. Before you do this just activate the "Automatic Answer" in the headset profile and set the ringing volume to "Mute". Now you can use your phone for checking out what people are talking about in a room. Just place it under a table in a room and call it. The phone receives the call without ringing and you can listen to what people are saying.

Nokia Mobile Tricks

NETWORK MONITOR

There is a hidden menu inside your Nokia phone. If you want to activate it, you'll have to re-program some chips inside of your phone.

1. Check your software version. You can only continue if you have v4.33, v4.73 or v5.24.
2. Take apart the phone.
3. De-solder the EEPROM (ATMEL AT 24C64).
4. Read out the data with an EEPROM programmer and save it to a file (Backup).
5. If you have v.33 or v4.73, change the address "03B8" from "00" to "FF".
6. If you have v5.24 then change the address "0378" from "00" to "FF".
7. Write the new data to the EEPROM and solder it back to the phone,
8. Power on your phone and you should have "Netmonitor" enabled.

The Network Monitor gives you the following information.

• Carrier number
• MS RX Level in DBM
• Received signal quality
• MS TX power level
• C1 (Path loss criterion, used for cell selection and reselection). The range is -99 to 99.
• RTL (Radio link timeout).
• Timeslot
• Indication of the transmitter status
• Information on the Network parameters.
• TMSI (Temporary Mobile Subscriber Identity).
• Cell identification (Cell ID, Number of cells being used).
• MCC (Mobile country code)
• MCN (Mobile network code)
• LAC (Location area code)
• Ciphering (On/Off)
• Hopping (On/Off)
• DTX (On/Off)
• Discard cell barred information

CHECK SIM-LOCK

Note - If you bought your Nokia on UK Vodafone or UK Cellnet you do not need to check this because they both transmit on GSM900, and they don't lock the phones. However if you bought your phone on UK Orange or UK One2one your phone may be blocked. The reason is that they both transmitt on GSM1800. To make a call on GSM1800 you need what is known as a "Dual band" phone. A dual band phone is able to transmit on both GSM900 and GSM1800, so they lock the phones so you can't use it with any other network simcard. If you find that your phone is locked you can try different software to unlock it. (we havn't found one that works yet), or you can ask your service provider who will gladly exchange the 10 digit code for about £35.

This is how to check the status of the 4 different locks. Aslo don't try entering the wrong number, because after 3 times it will block the phone for good.

There are 4 different locks on your Nokia phone.

• COUNTRY-LOCK
• NETWORK-LOCK
• PROVIDER-LOCK
• SIMCARD-LOCK

The code to read out the sim-lock status of your phone is

#PW+(MASTERCODE)+(Y)#

• # = DOUBLE-CROSS
• W = PRESS "*" THREE TIMES
• P = PRESS "*" FOUR TIMES
• + = PRESS "*" TWO TIMES
• MASTERCODE = 1234567890
• Y = NUMBER 1 TO 4

The master code is a secret code. The code has 10 digits, To read out the sim-lock status you can enter every combination you want!

"Y" Shows the status of the network-lock. Here you can enter a number from "1" to "4". The "4" is for the sim-card lock.

SIM-LOCK CHECKS

• #PW+1234567890+1# = GIVES PROVIDER-LOCK STATUS
• #PW+1234567890+2# = GIVES NETWORK-LOCK STATUS
• #PW+1234567890+3# = GIVES COUNTRY-LOCK STATUS
• #PW+1234567890+4# = GIVES SIM-CARD-LOCK STATUS.

Nokia Mobile Useful Tricks / Nokia Secret Codes

Nokia Secret Codes

Warning!

We are not responsible to accident with your mobile phone.
You trying these Nokia Secret Codes only at your own risk!
We are not admit any explanation.
Thanks.

Today we will help you to play with your Nokia mobile phones using secret mobile codes. You can display the hidden information of Nokia handsets and troubleshoot the routine problems with the help of these codes. Below codes work on most Nokia cell phones.

*#06# for checking the IMEI (International Mobile Equipment Identity).

*#7780# reset to factory settings.

*#67705646# This will clear the LCD display(operator logo).

*#0000# To view software version.

*#2820# Bluetooth device address.

#pw+1234567890+1# Shows if sim have restrictions.

*#92702689# – takes you to a secret menu where you may find some of the information below:
1. Displays Serial Number.
2. Displays the Month and Year of Manufacture
3. Displays (if there) the date where the phone was purchased (MMYY)
4. Displays the date of the last repair – if found (0000)
5. Shows life timer of phone (time passes since last start)

*#4720# – Half Rate Codec activation.

*#4720* – Half Rate Codec deactivation. The phone will automatically restart
If you forgot wallet code for Nokia S60 phone, use this code reset: *#7370925538#
Note, your data in the wallet will be erased. Phone will ask you the lock code. Default lock code is: 12345
Press *#3925538# to delete the contents and code of wallet.
Unlock service provider: Insert sim, turn phone on and press vol up(arrow keys) for 3 seconds, should say pin code. Press C,then press * message should flash, press * again and 04*pin*pin*pin# \
*#7328748263373738# resets security code.
Default security code is 12345
Change closed caller group (settings >security settings>user groups) to 00000 and ure phone will sound the message tone when you are near a radar speed trap. Setting it to 500 will cause your phone 2 set off security alarms at shop exits, gr8 for practical jokes! (works with some of the Nokia phones.) Press and hold “0? on the main screen to open wap browser.

#bta0# Display the Bluetooth MAC address (models with build-in Bluetooth radio, activate first to show address)

*#mac0wlan# Display the WLAN MAC address (models with build-in Wi-fi radio)

*#opr0logo# Clear the operator logo (3310 and 3330 only)

*#pca0# Activate the GPRS PCCCH support (early GPRS models)

*#pcd0# Deactivate the GPRS PCCCH support (early GPRS models)

*#res0wallet# Reset the mobile wallet (models with mobile wallet)

*#res0# Soft-format the memory (Symbian models only)

*#rst0# Reset to factory defaults, confirmation required (DCT4 or newer)

*#sim0clock# Display the SIM clock status (DCT3 only)

*#ssn0# Display the manufacturing serial number (mid-range and premium, non-Symbian models, and those devired from them)

*#war0anty# Display the manufacturing and repair info (no exit on DCT3) or total talk time on Symbian models

*efr0# Enable EFR encoding (pre-2003 models)

#efr0# Disable EFR encoding (pre-2003 models)

*hra0# Enable HR encoding (pre-2003 models)

#hra0# Disable HR encoding (pre-2003 models)

*#7370# Restore the phone to factory default settings. You will loose all your settings, data, etc. This is used to reset the phone to the same state when it was brand new.

# *#2820# Show Bluetooth MAC address.

# *#62209526# Show Wireless LAN MAC address.

*3370# : Enhanced Full Rate Codec (EFR) activation. It will automatically restart.

#3370# : Enhanced Full Rate Codec (EFR) deactivation. It will automatically restart.

*4370# : Half Rate Codec activation. It will automatically restart

#4370# : Half Rate Codec deactivation. It will automatically restart

*#147# (vodafone) this lets you know who called you last *#1471# Last call (Only vodofone)

*#21# Allows you to check the number that “All Calls” are diverted To

*#2640# Displays security code in use

*#30# Lets you see the private number

*#43# Allows you to check the “Call Waiting” status of your phone.

*#61# Allows you to check the number that “On No Reply” calls are diverted to

*#62# Allows you to check the number that “Divert If Unrea chable(no service)” calls are diverted to

*#67# Allows you to check the number that “On Busy Calls” are diverted to

*#67705646# Removes operator logo on 3310 & 3330

*#73# Reset phone timers and game scores

*#746025625# Displays the SIM Clock status, if your phone supports this power saving feature “SIM Clock Stop Allowed”, it means you will get he best standby time possible

*#7760# Manufactures code

*#7780# Restore factory settings

*#8110# Software version for the nokia 8110